Ember coffee mug control system heating element DarrellDesigner10 × Darrell Member for 10 years 4 months 624 designs 10 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Darrell × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/188736"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/188736"></iframe> Share a Link Copy URL https://explore.partquest.com/node/188736 Copy of Ember coffee mug control system heating element - on Tue, 07/11/2023 - 11:05 User-1689029768Designer247402 × User-1689029768 Member for 8 months 2 weeks 2 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby User-1689029768 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/601007"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/601007"></iframe> Share a Link Copy URL https://explore.partquest.com/node/601007 Copy of Thermal simulation - on Wed, 10/14/2020 - 17:05 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358900"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358900"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358900 Copy of Thermal simulation - on Wed, 10/14/2020 - 16:33 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358777"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358777"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358777 Copy of Ember coffee mug control system heating element - on Mon, 10/12/2020 - 18:29 asya.nikkyDesigner235777 × asya.nikky Member for 3 years 5 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby asya.nikky × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/356205"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/356205"></iframe> Share a Link Copy URL https://explore.partquest.com/node/356205 Copy of Ember coffee mug control system heating element - on Fri, 09/25/2020 - 01:46 shruti.sabharwal07Designer235109 × shruti.sabharwal07 Member for 3 years 6 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby shruti.sabharwal07 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/343564"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/343564"></iframe> Share a Link Copy URL https://explore.partquest.com/node/343564 Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Ember coffee mug control system heating element - on Tue, 07/11/2023 - 11:05 User-1689029768Designer247402 × User-1689029768 Member for 8 months 2 weeks 2 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby User-1689029768 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/601007"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/601007"></iframe> Share a Link Copy URL https://explore.partquest.com/node/601007 Copy of Thermal simulation - on Wed, 10/14/2020 - 17:05 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358900"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358900"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358900 Copy of Thermal simulation - on Wed, 10/14/2020 - 16:33 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358777"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358777"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358777 Copy of Ember coffee mug control system heating element - on Mon, 10/12/2020 - 18:29 asya.nikkyDesigner235777 × asya.nikky Member for 3 years 5 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby asya.nikky × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/356205"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/356205"></iframe> Share a Link Copy URL https://explore.partquest.com/node/356205 Copy of Ember coffee mug control system heating element - on Fri, 09/25/2020 - 01:46 shruti.sabharwal07Designer235109 × shruti.sabharwal07 Member for 3 years 6 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby shruti.sabharwal07 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/343564"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/343564"></iframe> Share a Link Copy URL https://explore.partquest.com/node/343564 Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Thermal simulation - on Wed, 10/14/2020 - 17:05 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358900"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358900"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358900 Copy of Thermal simulation - on Wed, 10/14/2020 - 16:33 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358777"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358777"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358777 Copy of Ember coffee mug control system heating element - on Mon, 10/12/2020 - 18:29 asya.nikkyDesigner235777 × asya.nikky Member for 3 years 5 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby asya.nikky × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/356205"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/356205"></iframe> Share a Link Copy URL https://explore.partquest.com/node/356205 Copy of Ember coffee mug control system heating element - on Fri, 09/25/2020 - 01:46 shruti.sabharwal07Designer235109 × shruti.sabharwal07 Member for 3 years 6 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby shruti.sabharwal07 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/343564"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/343564"></iframe> Share a Link Copy URL https://explore.partquest.com/node/343564 Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Thermal simulation - on Wed, 10/14/2020 - 16:33 avermokhinDesigner235377 × avermokhin Member for 3 years 5 months 3 designs 1 groups Title Description <p>Example of SystemVision simulation of a T3STER thermal model.</p> About text formats Tags thermalT3Ster Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby avermokhin × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/358777"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/358777"></iframe> Share a Link Copy URL https://explore.partquest.com/node/358777 Copy of Ember coffee mug control system heating element - on Mon, 10/12/2020 - 18:29 asya.nikkyDesigner235777 × asya.nikky Member for 3 years 5 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby asya.nikky × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/356205"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/356205"></iframe> Share a Link Copy URL https://explore.partquest.com/node/356205 Copy of Ember coffee mug control system heating element - on Fri, 09/25/2020 - 01:46 shruti.sabharwal07Designer235109 × shruti.sabharwal07 Member for 3 years 6 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby shruti.sabharwal07 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/343564"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/343564"></iframe> Share a Link Copy URL https://explore.partquest.com/node/343564 Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Ember coffee mug control system heating element - on Mon, 10/12/2020 - 18:29 asya.nikkyDesigner235777 × asya.nikky Member for 3 years 5 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby asya.nikky × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/356205"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/356205"></iframe> Share a Link Copy URL https://explore.partquest.com/node/356205 Copy of Ember coffee mug control system heating element - on Fri, 09/25/2020 - 01:46 shruti.sabharwal07Designer235109 × shruti.sabharwal07 Member for 3 years 6 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby shruti.sabharwal07 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/343564"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/343564"></iframe> Share a Link Copy URL https://explore.partquest.com/node/343564 Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Ember coffee mug control system heating element - on Fri, 09/25/2020 - 01:46 shruti.sabharwal07Designer235109 × shruti.sabharwal07 Member for 3 years 6 months 1 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby shruti.sabharwal07 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/343564"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/343564"></iframe> Share a Link Copy URL https://explore.partquest.com/node/343564 Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Ember coffee mug control system heating element - on Fri, 08/28/2020 - 08:47 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/337006"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/337006"></iframe> Share a Link Copy URL https://explore.partquest.com/node/337006 Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Copy of Ember coffee mug control system heating element - on Fri, 06/26/2020 - 19:01 DM_1Designer219536 × DM_1 Member for 4 years 9 months 21 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p> <p>See https://ember.com/</p> <p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted.</p> <p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p> <p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables).</p> <p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> <p>For more information see </p> <p><a href="https://beta.systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019">https://systemvision.com/blog/ember-coffee-mug-virtual-teardown-july-11-2019</a></p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby DM_1 × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/325171"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/325171"></iframe> Share a Link Copy URL https://explore.partquest.com/node/325171 Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››
Ember coffee mug control system heating element JleboiDesigner216469 × Jleboi Member for 4 years 10 months 9 designs 1 groups Title Description <p>This is a model of an Ember coffee mug -- a battery-powered, state-of-the-art beverage container that controls the temperature of your beverage to keep it at the setpoint you specify for a couple of hours.</p><p>See https://ember.com/</p><p>This model simulates the process of filling the mug with a hot liquid and maintaining it at the setpoint until the battery is exhausted. </p><p>This model includes modeling of the PCM (Phase Change Material). From the measurements used to characterize the actual device, it appears that the PCM contains multiple melting-point materials (see experimental results here: https://www.systemvision.com/design/ember-coffee-mug-2-pcm-experimental-data-0), thus two were included –at melting points of 47C and 52C respectively. The thermal mass of the liquid is modeled by the block with a “coffee cup” symbol. The feedback control is simple proportional gain. The battery is Li-Ion chemistry with a capacity calibrated from measurements on the real-life temperature profile over time – estimated as 5 cells in series (total ~17 V), since the charger voltage was just under 20 V, with 130 milliamp-hour capacity each, for a total of 650 milliamp-hours capacity.</p><p>The red wires are thermal, with temperature as the across variable and heat flow as the conserved through variable. Black wires are electrical, with voltage as the across variable and current as the conserved through variable. The green wires are directional control signals (modeling the control system variables). </p><p>The block labeled “Temp” models the temperature sensor, feeding back the temperature to the proportional controller. The block on the far-left in the setpoint, with a step-input from ambient to the desired beverage temperature.</p> About text formats Tags thermalemberPCMBatterylithium ion Select a tag from the list or create your own.Drag to re-order taxonomy terms. License - None - What's this? Design Titleby Jleboi × Embed Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/embed-design/267474"></iframe> Embed Live Design Copy Embed Code <iframe allowfullscreen="true" referrerpolicy="origin-when-cross-origin" frameborder="0" width="100%" height="720" scrolling="no" src="https://explore.partquest.com/node/267474"></iframe> Share a Link Copy URL https://explore.partquest.com/node/267474 Pagination Page 1 Next page ››