switched capacitor | PartQuest™ Explore

Switched-Capacitor Filter Frequency Response using TDFS

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 5 months

1,546

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

low pass filter

User-1692310955
Designer248683

User-1692310955

Member for

8 months 1 week

13

designs

1

groups

Welcome to the community!!

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

PBAJA

abigail.nino
Designer244076

abigail.nino

Member for

1 year 8 months

19

designs

1

groups

I'm a member of the PartQuest Explore community.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Copy of Switched-Capacitor Filter Frequency Response using TDFS - on Fri, 11/17/2023 - 20:36

User-1692310955
Designer248683

User-1692310955

Member for

8 months 1 week

13

designs

1

groups

Welcome to the community!!

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Copy of Switched-Capacitor Filter Frequency Response using TDFS - on Mon, 07/17/2023 - 21:44

RobertSt-Laurent
Designer172066

RobertSt-Laurent

Member for

6 years 3 months

1

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Stage testing of Switched-Capacitor Filter Frequency Response using TDFS

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 5 months

1,546

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Copy of New TDFS - on Tue, 03/09/2021 - 13:36

bedrosian1134
Designer198997

bedrosian1134

Member for

5 years 11 months

58

designs

4

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

To see the actual frequency sweep results from the TDFS analysis, open the full waveform viewer and expand the folder "Switched-Capacitor Filter Frequency Response using TDFS -&gt; Swept Frequency Gain Measure". The waveform "v1_over_vosc_complex -&gt; dbMag" is the magnitude of the frequency response of the R-C filter, and "v2_over_vosc_complex -&gt; dbMag" is the magnitude of the frequency response of the switched capacitor filter, both expressed in dB. Note that the phase response waveforms are also available.

For reference, note in the schematic that the R-C filter is connected to the channel 1 input of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Copy of Switched-Capacitor Filter Frequency Response using TDFS - on Sun, 12/20/2020 - 02:17

vijay1607130725
Designer237013

vijay1607130725

Member for

3 years 4 months

2

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Copy of test TDFS - on Mon, 11/16/2020 - 13:09

Devon Johnson
Designer250

Devon Johnson

Member for

9 years

49

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Copy of Switched-Capacitor Filter Frequency Response using TDFS - on Tue, 08/25/2020 - 13:36

david.g.bedrosian+rohm_test_designs_production
Designer234163

david.g.bedrosian+rohm_test_designs_production

Member for

3 years 8 months

101

designs

3

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design shows the use of the TDFS (Time Domain Frequency Sweep) method to measure the frequency response of two low-pass filters. One is just a simple RC filter circuit with 1 kHz cut-off frequency. The other is an equivalent filter using a switched-capacitor implementation.

Both small-signal AC (frequency domain) and TDFS (time-domain) analyses are run, and both give the same results for the RC filter. However, because of the switching aspect of the switched-capacitor filter, the results of the AC analysis are meaningless for that circuit. However, the TDFS approach is valid for that filter also, as well as for any other circuit or system containing switching, sampled data or digital content.

For reference, note in the schematic that the R-C filter is connected to channel 1 of the TDFS instrument, and the switched capacitor filter is connected to channel 2, hence the v1 and v2 distinction in the name of the results for the magnitude (dbMag) and phase. Both are measured relative to the stimulus input vosc, the oscillator output.

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Mike DonnellyDesigner19

Member for

User-1692310955Designer248683

Member for

abigail.ninoDesigner244076

Member for

User-1692310955Designer248683

Member for

RobertSt-LaurentDesigner172066

Member for

Mike DonnellyDesigner19

Member for

bedrosian1134Designer198997

Member for

vijay1607130725Designer237013

Member for

Devon JohnsonDesigner250

Member for

david.g.bedrosian+rohm_test_designs_productionDesigner234163

Member for

Mike Donnelly
Designer19

User-1692310955
Designer248683

abigail.nino
Designer244076

User-1692310955
Designer248683

RobertSt-Laurent
Designer172066

Mike Donnelly
Designer19

bedrosian1134
Designer198997

vijay1607130725
Designer237013

Devon Johnson
Designer250

david.g.bedrosian+rohm_test_designs_production
Designer234163