PMSM

Application Area

Motors & Drives

Electric Power Steering System with Ideal PMSM and Drive

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 5 months

1,541

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Thu, 04/11/2024 - 15:29

Designer0

Member for

4 years 3 months

0

designs

0

groups

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Thu, 03/21/2024 - 14:26

Designer0

Member for

4 years 3 months

0

designs

0

groups

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Fri, 03/01/2024 - 11:47

User-1709290055
Designer254603

User-1709290055

Member for

1 month 2 weeks

0

designs

1

groups

Welcome to the community!!

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Sat, 02/24/2024 - 22:06

User-1697201459
Designer250345

User-1697201459

Member for

6 months

24

designs

1

groups

Welcome to the community!!

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Cond Losses verify PMSM 7R8 - V2 - on Tue, 01/09/2024 - 14:07

John.Neeko.Garlitos
Designer245334

John.Neeko.Garlitos

Member for

1 year 2 months

29

designs

3

groups

I'm a member of the PartQuest Explore community.

Copy of Cond Losses verify PMSM 7R8 - V2 - on Tue, 01/09/2024 - 14:07

John.Neeko.Garlitos
Designer245334

John.Neeko.Garlitos

Member for

1 year 2 months

29

designs

3

groups

I'm a member of the PartQuest Explore community.

jeje
Designer252924

jeje

Member for

3 months 2 weeks

3

designs

1

groups

Welcome to the community!!

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of Electric Power Steering System with Ideal PMSM and Drive - on Sat, 12/30/2023 - 01:22

ersinarslan
Designer252820

ersinarslan

Member for

3 months 2 weeks

1

designs

1

groups

Welcome to the community!!

Description

This design includes an ideal Permanent Magnet Synchronous Machine (PMSM) model, as well as a continuous D-Q controller and drive circuit. The mechanical load model includes static and kinetic friction, a steering force that varies with rack displacement, as well as various mass, inertia, damping and spring/stiffness elements of the steering system. The steering torque, applied by the vehicle's driver, is assisted by torque from the motor scaled by the gear ratio. For the control, a non-linear gain profile is specified in the "torque_assist_table" function, and a lead compensator is used to improve system stability.

Note that this is a "tunable" design. Many of these system parameters can be changed by the user. Then a new simulation can be run and the updated results can be observed in the waveform viewers.

In a companion versions of this design, "EPS System with MotorSolve Generated PMSM Model and Ideal Drive", the ideal PMSM is replaced with a more realistic motor model generated by MotorSolve, the motor design tool. That model includes cogging torque, saturation and torque ripple behavior, which is seen to have a significant effect in this power steering application.

A second companion design, "EPS System with MotorSolve Generated PMSM Model and DQ/SVM Drive", uses both the MotorSolve motor model and also a sampled-data D-Q control algorithm and space-vector modulation (SVM) to control the switches in a power electronics circuit. This shows the ability to develop motor control and drives at the abstract level and also at the circuit level.

About text formats

Copy of PMSM Motor and PWM Drive - on Fri, 12/15/2023 - 17:08

ALPS_TOYAMA
Designer128621

ALPS_TOYAMA

Member for

6 years 10 months

6

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

Permanent Magnet Synchronous Machine (PMSM) and PWM Drive circuit, with mechanical load. The drive includes a D-Q control algorithm, and uses space-vector modulation (SVM) to generate the digital PWM signals to the switches of the bridge.

The waveform plot in the upper left shows the drive command (light blue waveform), with values 0 to 1, where 1 is commanding the maximum quadrature current of 10 A. The motor's response is the output shaft angle in radians (orange waveform), and shows that increasing torque command results in greater rotational displacement against the load spring. The waveform plot in the upper right shows the actual motor torque (green waveform) and the A-phase current (dark blue waveform).

In a companion version of this design, "PMSM Motor And Ideal Drive", Clarke and Park Transform models are used with a continuous ideal voltage drive.This shows the ability to develop motor control and drives at the abstract level and at the circuit level.

In yet another version of this design example, the ideal switches will be replaced with actual power MOSFET device models. This can help in bridge component sizing and performance specification.

About text formats

Terms of Use Cookie Notice Data Privacy Notice

Mike DonnellyDesigner19

Member for

Designer0

Member for

Designer0

Member for

User-1709290055Designer254603

Member for

User-1697201459Designer250345

Member for

John.Neeko.GarlitosDesigner245334

Member for

John.Neeko.GarlitosDesigner245334

Member for

jejeDesigner252924

Member for

ersinarslanDesigner252820

Member for

ALPS_TOYAMADesigner128621

Member for

Mike Donnelly
Designer19

User-1709290055
Designer254603

User-1697201459
Designer250345

John.Neeko.Garlitos
Designer245334

John.Neeko.Garlitos
Designer245334

jeje
Designer252924

ersinarslan
Designer252820

ALPS_TOYAMA
Designer128621