PartQuest Explore Promote

designs

groups

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.

These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance.

If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.

The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures.

The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Copy of Linear Regulator Temperature Finder - on Wed, 04/10/2024 - 17:39

Designer0

Member for

4 years 3 months

designs

groups

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.

These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance.

If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.

The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures.

The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Copy of Linear Regulator Temperature Finder - on Sat, 02/17/2024 - 10:29

User-1708333112
Designer254184

User-1708333112

Member for

1 month 3 weeks

designs

groups

Welcome to the community!!

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.

These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance.

If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.

The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures.

The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Copy of Linear Regulator Temperature Finder - on Sat, 02/17/2024 - 10:29

User-1708333112
Designer254184

User-1708333112

Member for

1 month 3 weeks

designs

groups

Welcome to the community!!

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.

These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance.

If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.

The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures.

The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Copy of Linear Regulator Temperature Finder - on Tue, 01/26/2021 - 15:15

aladarbunak
Designer236418

aladarbunak

Member for

3 years 5 months

34

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.

These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance.

If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.

The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures.

The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Copy of Linear Regulator Temperature Finder - on Tue, 01/26/2021 - 15:15

caioguilherme_mo
Designer237698

caioguilherme_mo

Member for

3 years 2 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.

These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance.

If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.

The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures.

The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Copy of Coordinated Electrical and Thermal Design for a Linear Regulator Circuit - on Wed, 11/18/2020 - 14:38

1144097s
Designer236619

1144097s

Member for

3 years 4 months

3

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This design example demonstrates electro-thermal trade-off analysis for power dissipating circuits. The design includes a 3.3V linear regulator that drives up to 1A of load current. To reduce the input voltage to the regulator and thereby reduce its power dissipation, a series NPN transistor with a zener diode controlling its base voltage is used.

To explore the design trade-offs, the user can change the zener voltage and re-run the simulation. This will result in not only a change to the electrical voltage split across the transistor and regulator, but also a corresponding change to their observed junction temperatures. The user can also change the values of the thermal resistances (from case to ambient*) for those components, to identify the heat-sink or other thermal mitigation required to meet all the design constraints of this circuit.

The user can also change the circuit's operating environment, including the battery voltage, the ambient temperature and the load resistance (initial and pulse values).

*Note: The junction to case thermal resistances are specified by the manufacturer for these parts, so they cannot be changed by the circuit's thermal designer.

Linear Regulator Temperature Finder

Derek_3
Designer227135

Derek_3

Member for

4 years 4 months

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance. If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures. The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Linear Regulator Temperature Finder

Mason Adams
Designer209116

Mason Adams

Member for

5 years 3 months

33

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance. If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures. The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.

Linear Regulator Temperature Finder

pfcboost
Designer210798

pfcboost

Member for

5 years 2 months

3

designs

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This "virtual test circuit" can help designers predict the temperatures of a linear regulator, based on readily available information from the manufacturer's datasheet. Users can simply make a copy of this circuit, then adjust the regulator model's parameters to match the electrical and thermal characteristics for their particular part.These parameters include the output voltage, VDO and current limit, as well as the junction-to-case and junction-to-ambient or heat-sink thermal resistance values. In this example, an L78S05 with direct case to ambient heat transfer is modeled (i.e. no heat-sink). The datasheet specifies the junction-to-case resistance is 5degC/Watt, and the junction-to-ambient resistance for a T0-220 package is 50 degC/Watt. Therefore, the difference of 45 degC/Watt is assumed to be the case-to-ambient thermal resistance. This value is assigned as the "heat-sink" resistance. If an actual heat sink is being used, its published thermal resistance would be used instead. If the heat sink heat capacitance is also provided, that value can be applied to the thermal capacitor, and then the simulation will predict not only the steady-state operating temperature, but also temperature transients.The input voltage function generator can also be adjusted to apply any time-varying input voltage profile, and the test circuit will show the corresponding time-varying temperature profile. This can be used to identify peak as well as average operating temperatures. The user can also change the load current level and/or the load type using any relevant models in the Component Library, or create custom load models.