CAT4104 | PartQuest™ Explore

CAT4104 LED Controller Application Example

minodori
Designer36761

minodori

Member for

8 years 1 month

82

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This is an application example for an ON Semiconductor CAT4104 Quad Channel Constant Current LED Driver. It demonstrates the part's resistor programmable and independent current control for each channel, as well as its PWM dimming capability. By choosing the value of r_set from 768 Ohm up to 12 kOhm, the current in each channel is controlled from 175 mA down to 10 mA. That is, the channel current is 100 times the current in r_set, which is driven by an internal 1.2 V source from the CAT4104 "rset" pin. The LED strings can be driven by parallel channels to reach even higher string current levels. For LED dimming, the CAT4104 "en_pwm" pin can be driven by a PWM signal. In this application circuit, that signal is provided by an LM555 timer module. The potentiometer setting controls the PWM duty cycle, and the element's total resistance value determines the PWM frequency. The initial potentiometer wiper ratio of 0.5 and resistance of 20 kOhm, gives a 50% PWM duty cycle at 500 Hz.The LED string model, for which the user can select the number of LEDs in the string as well as the individual LED operating parameters, has an internal quantity that gives the "perceived" luminous output. This includes a 15 Hz Low-pass filter, to represent the light-averaging effect of the human eye. This is shown in the dark blue waveform. The user can explore the effect of changing the potentiometer settings, which in turn change the PWM characteristics, on the perceived light output. The initial LED parameters for this example represent a CREE XPCWHT-L1-R250-009E6.

About text formats

CAT4104 LED Controller Application Example

DavidGohara
Designer199194

DavidGohara

Member for

5 years 10 months

2

designs

1

groups

Add a bio to your profile to share information about yourself with other SystemVision users.

Description

This is an application example for an ON Semiconductor CAT4104 Quad Channel Constant Current LED Driver. It demonstrates the part's resistor programmable and independent current control for each channel, as well as its PWM dimming capability. By choosing the value of r_set from 768 Ohm up to 12 kOhm, the current in each channel is controlled from 175 mA down to 10 mA. That is, the channel current is 100 times the current in r_set, which is driven by an internal 1.2 V source from the CAT4104 "rset" pin. The LED strings can be driven by parallel channels to reach even higher string current levels. For LED dimming, the CAT4104 "en_pwm" pin can be driven by a PWM signal. In this application circuit, that signal is provided by an LM555 timer module. The potentiometer setting controls the PWM duty cycle, and the element's total resistance value determines the PWM frequency. The initial potentiometer wiper ratio of 0.5 and resistance of 20 kOhm, gives a 50% PWM duty cycle at 500 Hz.The LED string model, for which the user can select the number of LEDs in the string as well as the individual LED operating parameters, has an internal quantity that gives the "perceived" luminous output. This includes a 15 Hz Low-pass filter, to represent the light-averaging effect of the human eye. This is shown in the dark blue waveform. The user can explore the effect of changing the potentiometer settings, which in turn change the PWM characteristics, on the perceived light output. The initial LED parameters for this example represent a CREE XPCWHT-L1-R250-009E6.

About text formats

CAT4104 LED Controller Application Example

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 5 months

1,545

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Description

This is an application example for an ON Semiconductor CAT4104 Quad Channel Constant Current LED Driver. It demonstrates the part's resistor programmable and independent current control for each channel, as well as its PWM dimming capability. By choosing the value of r_set from 768 Ohm up to 12 kOhm, the current in each channel is controlled from 175 mA down to 10 mA. That is, the channel current is 100 times the current in r_set, which is driven by an internal 1.2 V source from the CAT4104 "rset" pin. The LED strings can be driven by parallel channels to reach even higher string current levels.For LED dimming, the CAT4104 "en_pwm" pin can be driven by a PWM signal. In this application circuit, that signal is provided by an LM555 timer module. The potentiometer setting controls the PWM duty cycle, and the element's total resistance value determines the PWM frequency. The initial potentiometer wiper ratio of 0.5 and resistance of 20 kOhm, gives a 50% PWM duty cycle at 500 Hz.The LED string model, for which the user can select the number of LEDs in the string as well as the individual LED operating parameters, has an internal quantity that gives the "perceived" luminous output. This includes a 15 Hz Low-pass filter, to represent the light-averaging effect of the human eye. This is shown in the dark blue waveform. The user can explore the effect of changing the potentiometer settings, which in turn change the PWM characteristics, on the perceived light output. The initial LED parameters for this example represent a CREE XPCWHT-L1-R250-009E6.

About text formats

robust CAT4104 Schematic Model

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 5 months

1,545

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

robust CAT4104 LED driver - Flat Schematic

Mike Donnelly
Designer19

Mike Donnelly

Member for

10 years 5 months

1,545

designs

10

groups

Member of the PartQuest Explore Development Team. Focused on modeling and simulation of analog, mixed-signal and multi-discipline systems covering a broad range of applications, including power electronics, controls and mechatronic systems.

Terms of Use Cookie Notice Data Privacy Notice

minodoriDesigner36761

Member for

DavidGoharaDesigner199194

Member for

Mike DonnellyDesigner19

Member for

Mike DonnellyDesigner19

Member for

Mike DonnellyDesigner19

Member for

minodori
Designer36761

DavidGohara
Designer199194

Mike Donnelly
Designer19

Mike Donnelly
Designer19

Mike Donnelly
Designer19