LVDT Position Sensing System | SystemVision® Cloud

Mike DonnellyDesigner19

Mike Donnelly

Member for

7 years 5 months

997

designs

5

groups

Original member of the SystemVision development team. Modeling and Applications Specialist

238 views total

92 views today

Description

<p>A Linear Variable Differential Transformer (LVDT) and analog signal conditioning circuit are used for a position sensing system. An oscillator provides a sinusoidal excitation signal to the primary winding of the LVDT. The differential secondary winding outputs are rectified and low-pass filtered. The difference voltage, which is proportional to the mechanical displacement of the LVDT core, is the measurement result.</p><p>This virtual prototype can be used to select the low pass filter frequency, so it is low enough that the oscillation frequency is mostly removed from the output signal, yet high enough to track the natural frequency of mechanical system the sensor is intended to measure. It can also be used to analyze parasitic effects, such as the resistance of the wires connecting the sensor to the signal conditioning circuits. This resistance affects the output voltage and therefore corrupts the measurement results. Likewise, the non-linear behavior of the rectifier diodes affects the linearity of the position measurement.This can be seen if the force input is slowly ramped from -1000N to 1000N over a 1 second interval.</p>

About text formats

What's this?

Comments

Submitted by MentorGraphicS… on 3 Feb 2016 | 16:09 PST

Hi,

Can you explore the netlist of a design or figure to use.

Thanks

Log in to post comments

Submitted by Darrell on 4 Feb 2016 | 10:37 PST

Hi Sumon,

When you edit and simulate a design, there is more information available in the simulation results transcript.

Can you say more about what you would like to accomplish?

Darrell

Log in to post comments

Submitted by mr.vladzla on 9 Feb 2016 | 08:35 PST

Hi.
How I must delete anything component?

Log in to post comments

Submitted by Mike Donnelly on 9 Feb 2016 | 12:46 PST

You cannot change this design, because it belongs to me. But you can make a copy and then you can edit your copy. To delete, you can just left-click on a component to select it, then hit the delete key, or after selecting you can right-click and choose "delete" from the pop-up menu. Hope that helps!

Log in to post comments

Please login or register to post comments

You must be a registered user to add a comment.

Home Browse All Designs Terms of Use Login

Design Notification Block

Thanks for trying out SystemVision.com

Mike DonnellyDesigner19

Mike Donnelly

Member for

Comments

Please login or register to post comments

Design Notification Block

Thanks for trying out SystemVision.com

Mike DonnellyDesigner19

Mike Donnelly

Member for

Comments

Please login or register to post comments

Share Design TitleDesigner

Embed Design

Copy Embed Code

Embed Live Design

Copy Embed Code

Share a Link

Copy URL

Preview of Design Embed

Copy Embed Code Go Back to Share Options

Preview of Live Design Embed

Copy Embed Code Go Back to Share Options